|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
F Semiconductor S4580P Dual OP AMP Description S4580P is the dual operational amplifier, specially designed for improving the tone control, which is most suitable for the audio application. Featuring noiseless, higher gain bandwidth, high output current and low distortion ratio, and it is most suitable not only for acoustic electronic parts of audio pre-amp and active filter, but also for the industrial measurement tools. It is also suitable for the head phone amp at higher output current, and further more, it can be applied for the handy type set operational amplifier of general purpose in application of low voltage single supply type which is properly biased of the input low voltage source. Features * * * * * Operating voltage. Low input noise voltage. Wide gain bandwidth product. Low distortion. Slew rate. (2V ~ 18V) (0.8 rms typ.) (15MHz typ.) (0.0005% typ.) (5V/ typ.) Ordering Information Type NO. S4580P Marking S4580P Package Code SOP-8 Outline Dimensions unit : mm Block Diagram KSI-L012-000 1 S4580P Absolute maximum ratings Characteristic Supply voltage Differential input voltage Input voltage Output current Power Dissipation Operating temperature Storage temperature (Ta = 25 C) Symbol VCC VID VIC(note) IO PD Topr Tstg Ratings 18 Unit V V V mA mW C C 30 15 50 800 -40 ~ +85 -40 ~ +125 (note) For supply voltage less than 15V, the absolute maximum input voltage is equal to the supply voltage. Electrical Characteristics (Unless otherwise specified. VCC = +15V, VEE=15V and Ta = 25 C) Characteristic Input offset voltage Input offset current Input bias current Input common mode Voltage Range Maximum Output Voltage Large signal Voltage Gain Common mode rejection ratio Power supply voltage rejection ratio Slew Rate Supply Current Equivalent input noise voltage Total harmonic distortion Gain bandwidth product Symbol VIOS IIOS IIB VICR VOM GV CMRR Test Condition Rg 10 RL 2 Vout=10V, Rg 10 RL 2 Min. 12 12 90 80 Typ. 0.5 5 100 13.5 13.5 110 110 Max. 3 200 500 - Unit mV nA nA V V dB dB PSRR SR ICC VNI THD GB Rg 10 RL 2 RIAA, RS=2.2 , f=30 LPF AV=20dB, VO=5V, RL=2 f=1KHz f=10KHz 80 - 110 5.0 6.0 0.8 0.0005 9.0 - dB V/us mA uVrms % MHz 15 KSI-L012-000 2 S4580P Electrical Characteristic Curves Fig. 1 GV - f (Vcc/VEE=15V,RL=2 ,40dBAmp,Ta=25) Fig. 2 VOP-P - f (Vcc/VEE=15V,RL=2 ,Ta=25) Fig. 3 IIB - Ta (Vcc/VEE=15V) Fig. 4 VOM - VCC/VEE (RL=2 ,Ta=25) Fig. 5 VOM - RL (Vcc/VEE=15V,Ta=25) Fig. 6 EN - f (Vcc/VEE=15V,RS=50 ,Av=60dB,Ta=25) KSI-L012-000 3 S4580P Electrical Characteristic Curves Fig. 7 VOM - Ta (Vcc/VEE=15V,RL=2 ) Fig. 8 ICC - Ta (Vcc/VEE=15V) () () Fig. 9 VIOS - Ta (Vcc/VEE=15V) Fig. 10 ICC - Vcc (Ta=25) () KSI-L012-000 4 |
Price & Availability of S4580P |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |